|
|
TUNGSTEN DISULPHIDE HIGH TEMPERATURE DRY FILM LUBRICANT |
Code Number: IP3016 |
Resin bonded Tungsten disulphide dry film lubricant designed for running at temperatures up to 400°C. Originally designed for protecting "Bird mouths" on Trent 7 & 800 over HVOF.
MSRR 3016
400°C on steel for 1000 hours
Rubbing wear MSRR 9910 test 21 pass
Apply in accordance with RPS 661/53 or to other application instruction
Abrasive blast; chemical conversion coat or anodise surface according to metal. Stove at 190°C
Mixing Ratio | Notapplicable |
Thinner | As specified |
Supply Viscosity | Ready to use |
Colour | Grey |
Gloss Level | Not applicable |
Film Thickness | Not applicable |
Flash Point / Class / UN No | ≥21ºC & ≤32ºC / 3 / Paint UN1263 |
Pack Size | 0.5 litre containers |
Shelf Life | 12 months |
Health & Safety | Before use please obtain our most up to date Health & Safety information by requesting a Safety Data Sheet |
This information is given in good faith for the guidance of users, but is without warranty or liability. Any queries should be referred to our technical department.
