Description & Uses

Single pack silicone alkyd coatings, formulated to give high temperature resistance compared with typical air drying paints. Exhibit fast air drying properties.

Typically used on components requiring temperature resistance, to include exhaust systems, hot oil piping, aircraft engines.

Approvals & Relevant Specifications

Meets the performance requirements of MIL-C-13370.

Alternative to Pyrosil 7G800

Performance

Heat Resistant up to 300°C (572°F), with good chemical resistance and corrosion resistance. Suitable for use on both degreased and grit blasted steel and aluminium. Fast air drying; can also be force cured as required.

Application Instructions

Surface Preparation: Ensure that all surfaces are clean and free from dirt.

Pre-Treatment: Shot/Grit blast to SA 2-2½. Remove dust/dirt residues.

Thinner/Reducer Addition: 10-15% addition of IP7800-Reducer

Application Method: Apply by spray. It is recommended that latest generation compliant spray guns are used. Follow gun manufacturers’ recommendations of atomising pressure etc. Apply mist coat followed by cross coat to achieve a typical dry film thickness of 30-40 microns

Application Instruction Sheet for IP7800 Heat Resistant Coatings.

Drying / Curing

Air Dry:	Touch Dry: 30 minutes Hard Dry: 4-5 hours: Allow 24 hours before using coated product
Force Cure:	Flash off 30 minutes, then cure for 1 hour @ 100°C (212°F)

Technical Properties

Viscosity:	65±2 secs/ISO4 cup/23±2oC
Specific Gravity:	0.972 ± 0.05
Supply Solids:	35% w/w
Supply VOC:	630 gms/litre
Flash Point:	30°C
Thinner / Reducer:	IP7800-Reducer
Colour(s):	IP7800-9003; Matt Black Please refer to the sales office for availability of other colours
Gloss:	Matt: Colours; Gloss: Clear
Clean Up:	IP7800-Reducer or 40006 gunwash
Theoretical Coverage:	6.8 – 9.1 m2 per litre @ 30-40 microns dry film thickness

Storage - Health & Safety

Flammable liquid:	Highly flammable liquid: store and use in accordance with the flammable liquid regulations.
Shelf life:	12 months Temperate; 6 months Tropical.
Health & Safety:	Before use please request, our latest Health and Safety Data Sheet

Order

To Order:

To order contact Indestructible Paint.

NON-WARRANTY. The information presented in this publication is based upon the research and experience of Indestructible Paint No Representation or warranty is made, however, concerning the accuracy or completness of the information presented in this publication. Indestructible Paint make no warranty or representation of any kind, express or implied, including without limitation any warranty of merchantability or fitness for any particular purpose, and no warranty of representation shall be implied by law or otherwise. Any products sold by Indestructible are not warranted as suitable for any particular purpose to the buyer. The suitability of any products for any purpose particular to the buyer is for the buyer to determine. Indestructible Paint assumes no responsibility for the selection of products suitable to the particular purposes of any particular buyer. Indestructible shall in no event be liable for any special, incidental or consequential damages.