IP Code No - NML58
OMAT No - 7/77
Product Description -
TWO PART ATTRITION COATING WITH EXTENDED SHELF LIFE ( LONG LIFE VERSION OF NML 46 FOR FIELD AND OVERSEAS USE) TWO PART ATTRITION COATING WITH EXTENDED SHELF LIFE ( LONG LIFE VERSION OF NML 46 FOR FIELD AND OVERSEAS USE ) USED AS A REPAIR COATING INSTEAD OF NML 46
Approvals / References / Specs -
O/ MAT 7 / 77
THIS MATERIAL IS USED AS AN OVERHAUL MATERIAL, AND HAS NO MSRR OR RPS COVERAGE
Performance -
Double lap shear strength at 180ºC (355ºF) will be not less than 5086 MPa.
Application -
CLEAN AND DRY SURFACE APPLY IN ACCORDANCE WITH OP 342 (APPLICATION OF WEARAWAY COATINGS)
Mixing Ratio: 15 PBW NML 58 PART A with 1 PBW NML 58PART B MIX UNTIL ALL IS OF A UNIFORM COLOUR WITH NO STREAKS
Cure: 60 MINUTES @ 180°C(360°F) MIX MUST BE USED WITHIN 4 HOURS OF MIXING; IF PART B CRYSTALLISES ON STORAGE; WARMING TO 70°C ( 160°F ) WILL RESTORE FLUIDITY
Physical Properties -
Supply Viscosity - NOT APPLICABLE
Supply SG
Supply Solids:
Theoretical Coverage:
VOC Content:
Flash Point / Class / UN No
Pack Size
Shelf Life - 12 months unopened, stored at UK
ambient temperatures.
Health & Safety
Before use, please request our latest health & safety data sheet.
This information is given in good faith for the guidance of users, but is without warranty or liability. Any queries should be referred to our technical department.
Please contact our sales team if you require any help or more information, they would be delighted to help.
