Aero Engine Coatings

138071

QUICK AIR DRYING MARKING PAINTS

A quick air drying marking paint, which can be removed with strong solvents if required. Colour stable, weather resistant. Not resistant to heat, fuels and ester lubricants. Designed for use at ambient temperatures for marking purposes

IP1009

VERY SMOOTH HIGH TEMPERATURE ALUMINIUM

One part high temperature silicon aluminium coating designed for very smooth surface finishes for use particularly on aero engine parts.

MSRR 1009. Alternative to DTD 900/4124A - TN 1016 M3, Croda 2845

IP9029-R2

NEW HIGH HEAT RESISTANT LEAD FREE STOVING ALUMINIUM ALSO XYLENE AND TOLUENE FREE

IP9029/R2 is a replacement for PL101, a higher heat resistant stoving enamel than PL101, and IP9139, with heat resistance increased from 500ºC to 650ºC, it also has superior thick film forming properties at up to 6 thou (150 microns). As part of the evolution of these high performance products , this has been developed xylene and toluene free for certain US applications, It has been warmly welcomed in America as being superior to the US spec TT-P-28 for corrosion resistance and resistance to Skydrol and gear fluid

MSRR9029, OMAT 7/1A, similar to BAEP 3519 (Pending PWA578F) Alternative to AFS 977, PL101C2, E3746, 4863-A-8000. Supersedes IP9139. And IP9029R1. Allied Signal/Textron, Alternative to Glyptal number 86009-P6430 & SSP501/502 Allison EMS 26710
Honeywell P6430 &
NGPS 134.

IP9134-R1

ALUMINIUM FILLED POLYIMIDE COATING

Highly resistant aluminium loaded polyimide stoving enamel with good heat, marine environment, corrosion and aircraft fluid resistance. It is suitable for operating temperature of up to 300ºC (570ºF).

MSRR 9134 Was originally approved to AFS 1566 NATO STOCK NO 99 1925127 IP9134/R1 (Alternative to PL165)

IP9139

HEAT RESISTANT STOVING ALUMINIUM MAXIMUM TEMPERATURE 500ºC

Heat resistant stoving enamel. Resistant to ester lubricants, Skydrol, heat and corrosion. Also see IP9029 for improved performance.

MSRR9029 OMAT 7/1A - For air dry touch up to 500ºC (930ºF) use IP9138 Alternative to PL101, E3746, 4863-A-8000

IP9140

METAL PROTECTIVE VARNISH CLEAR *

Metal protective varnishes are suitable for light alloys such as Magnesium and Aluminium. They are highly resistant to heat, corrosion, lubricants, hydraulic fluids and variations fuel. They are available in 3 versions, IP9140 is the clear dipping product, IP9149 the Aluminium spraying version and IP9155 the green tinted spraying version. Approved alternative to the Aerolac Metal Protective Varnish scheme. Used in conjunction with IP9165 and IP9166 as a Rolls approved Magnesium protective system

AFS 1594 & DTD875A.OMAT 712A RR Code 137960 Alt to 1603-C-8070 VX1290A/70 CV113

IP9149

METAL PROTECTIVE VARNISH ALUMINIUM

Metal protective varnishes are suitable for light alloys such as Magnesium and Aluminium. They are highly resistant to heat, corrosion, lubricants, hydraulic fluids and variations fuel. They are available in 3 versions, IP9140 is the clear dipping product, IP9149 the Aluminium spraying version and IP9155 the green tinted spraying version. Approved alternative to the Aerolac Metal Protective Varnish scheme. Used in conjunction with IP9165 and IP9166 as a Rolls approved Magnesium protective system.

AFS 1594 & DTD875A. OMAT 729B RR Code 137493 Alt to 1603-A-8070 E3521 MP404

IP9151

THINNER RR Code 139403

Thinner for use with IP9029/R2,IP9136/R1,IP9138, IP9139, IP9140, IP9149, IP9155, IP9165, IP9166, IP9169, IP9170, IP9188, IP9253/R2, PL73, PL 95, PL 110, PL 111, PL 198, PL 161,PL 237/R1

THINNER IP 9151 - OMAT 7/183 is the approved thinner for use with many coatings

IP9155

METAL PROTECTIVE VARNISH GREEN

Metal protective varnishes are suitable for light alloys such as Magnesium and Aluminium. They are highly resistant to heat, corrosion, lubricants, hydraulic fluids and variations fuel. They are available in 3 versions, IP9140 is the clear dipping product, IP9149 the Aluminium spraying version and IP9155 the green tinted spraying version. Approved alternative to the Aerolac Metal Protective Varnish scheme. Used in conjunction with IP9165 and IP9166 as a Rolls approved Magnesium protective system

AFS 1594 & DTD875A. OMAT 701A RR Code 137945 Alt to 1603-C-2250 VX1290A/25 (was released DTD900/4093) MP405; NSN 8010-99-1512358

IP9159

GRAPHITE LOADED CLEAR & GREY LACQUERS FOR TEXTRON

Another product based on the high performance Rockhard stoving clear lacquer system. Approved by Textron Lycoming as a direct alternative to Synthetesine 200

ALF 502/SP P 519 IP9159 - Clear IP9159 - Grey (FED STD Colour 16081-16099)

IP9165/R1
IP9166

SKYDROL RESISTING STOVING SYSTEM

Stoving, spray applied system comprising of a primer and topcoat. Used over IP9140, IP9149 or IP9155 as a Magnesium protective system to 220ºC (430ºF).

Was released to MSRR9032 which has now been cancelled by Rolls Royce. Use MSRR 9226 – 700-155-003, and 985-000-693,

IP9188-R1

EROSION AND HEAT RESISTANT COATING

Latest generation of product developed with the environment in mind. Xylene and toluene free in accordance with our own ISO 14000, and in line with CPW 625 Erosion resistant stoving coating, resistant to heat, corrosion and aircraft fluids. Suitable for use on steel and aluminium components with a continuous running temperature of less than 280ºC (535ºF). For use on engine components operating up to 250ºC. This material is now only normally made in white as a standard product, although it can be made to BS381C-693 (Rolls Royce Grey) and BS381C-175 (Blue), and others including BS 381c-631. Current uses include the impellers in gas compressors pumping North Sea gas from offshore platforms. Resistant to hydrogen sulphide and carbon dioxide; used to protect rough casting against corrosion and crusting.

MSRR9188 OMAT 7/5D (Alternative to SE164; PL205; and 3862-X-0000) Similar to DTD 900/6002 MTU – MTS

IP9253-R2

SACRIFICIAL ALUMINIUM ORGANIC HIGH HEAT RESISTING COATING

Stoving, spray applied high heat resisting aluminium filled coating, for use on engine components operating at up to 600º (1115ºF) on 12% Chromium Steel or 500ºC (930ºF) on low alloy steels which are subjected to harsh media such as phosphate ester based hydraulic fluids.

MSRR 9253 OMAT 7/126B RR Code 137420 Replaces PL219

IP9310

HEAT RESISTANT CHROMATED PRIMER FOR MAGNESIUM AND OTHER METALS

Heat resistant chromated primer for use either as a stand alone product or in conjunction with IP9188R2 or our IP9029 and PL163 as a system approved by Rolls Royce for protecting Magnesium against corrosion to temperatures up to 300ºC (570ºF). First used on the Rolls Royce Viper engine in 1997.

MSRR9310. RPS 661/42