|
IP Code No - IP9064
|
| |
| Product Description - |
|
Two Pack epoxy finishes for interior and exterior use. Resistant to abrasion,
corrosion and most aircraft operating fluids and chemicals. Available
in a wide range of gloss, eggshell and matt finishes. Available in a limited
range of lead-free gloss finishes.
|
| Approvals/References/Specs -
|
|
British Ministry of Defence (DRA) DTD 5555A
Rolls Royce MSRR 9064 / RPS 511
|
| References - |
| Base |
Alternative to EC75 + ACT |
| Gloss |
9110/0 series (SL 5459) |
| Gloss (lead-free) |
9110/9 series (SL 5459) |
| Gloss (clear) |
9291 C 8000 (TVZ 119) |
| Eggshell |
9110/2 series (5SL 5459) |
| Matt |
9110/3 series (2SL 5459) |
| Catalyst |
|
| Gloss |
2000 2 0538 (SH 5538) |
| Gloss (lead-free) |
2000 7 0010 (CSL 5460) |
| Gloss (clear) |
9291 C 8010 (TVZ 121) |
| Eggshell/Matt |
2000 7 0290 (CSL 6201 A) |
| Thinner |
2000 6 0032 (TSL 5373) |
|
| Performance - |
|
Resistant to most aircraft operating chemicals and fluids
eg mineral oil based, diester lubricant. Water and humidity resistant.
|
| Surface Preparation - |
All surfaces should be clean. Oil and grease should be
removed using an approved solvent cleaner eg Def Stan 03-2 (2000 5 0098).
Finishes should be applied to substrates coated with either:
- Two pack etch primer eg IP9064-4853 & 4854
- Two pack epoxy primer eg IP9064-6362 & CAT
|
| Application - |
| Method |
Conventional, airless or
electrostatic airless spray |
| No. of Coats |
One double track or two single coats
allowing a flash off of 30 minutes between coats to achieve dry film
characteristics. |
| Cleaning Solvent |
IP9064/Thin |
|
| Limitations - |
|
Do not apply below 51C or above 75% RH. Pot life reduces
as temperature increases eg at 351C pot life is 4 hours. Finishes prone
to chalking on exposure to sunlight. This does not lead to total degradation
of the film but will reduce gloss level.
|
| Health & Safety - |
|
For full details consult Product Safety data sheets prior to use. Use
normal precautions such as gloves and face masks. Adequate ventilation
must be maintained. Skin contact, wash thoroughly with soap and water.
Eye contact, irrigate with water - seek medical attention. Contains flammable
solvents, keep away from sparks and naked flames. Highly flammable observe
low flash regulations.
|
| Physical Properties - |
| |
|
| Mixing Ratio |
|
| Thinner |
IP 9064/Thin |
| Spray Viscosity (@ 20ºC) |
27-32 secs. BSB3 |
| Pot Life @
25ºC |
8 hours min. |
| Surface |
1½ hrs |
| Hard |
6 hrs |
| Overcoatable, min |
6 hrs |
| Overcoatable, max |
72 hrs |
| Force Drying |
Permissible up to temperatures
of 120ºC for a maximum of 1 hour (flash off 30 minutes) |
| Dry Film - |
|
| Weight |
40 +/- 8
g/m² |
| Thickness |
25 +/- 5
microns |
| Theoretical Coverage |
10-15 m²/litre |
| Sheen |
Gloss, matt or eggshell |
| Colour |
Wide range (BS 381C, BS 4800 etc) |
| Flash Point, components |
All components below 22.8ºC |
| Mixed |
Below 22.8ºC |
| Pack Size |
5 litre |
| Shelf Life |
6 months minimum in Tropical Climates |
Health & Safety |
Before use please request, our latest Health and Safety Data Sheet |
