Very hard high temperature sealant designed for use in
turbine blade roots etc where minimal shrinkage is required. Designed
for use over 300°C. Once this product has gone off, it can be run at 400°C,
in thicknesses of several thou thick with no noticeable shrinkage.
Approvals/References/Specs -
MSRR 1043, OMAT 844A
Performance -
Designed to replace PL224, this material passes an ASTM shrinkage test
at 300°C, and is resistant to Skydrol hydraulic brake fluid, and turbine
fuels and oils. Apply for RPS 482/54.
