IP Code No - IP9168 A&B
Product Description -
Chemically cured, high grade, strontium chromate epoxy primer with exceptional adhesion to correctly prepared substrates, particularly magnesium. It has excellent leaching properties and a superior level of protection against all forms of corrosion, including filiform corrosion. Resistance to organic solvents and aircraft operating fluids.
Principally used as the primer for our IP9064 2 Part epoxy range but can be used on other polyurethane, epoxy and acrylic finishing schemes. Alternative to PR143 system.
Approvals/References/Specs -
IP9168A (Base) IP9168B (Catalyst) MSRR 9064 BSX 33 Type A & DTD 5555A
DTD 5567/5580/5599/5618 & 900/4919 Meets requirements of MIL-P-23377
Allied Signal/Textron approved.
Performance -
This material meets the requirements of BSX 33, which includes 1 mm cross hatch adhesion, water resistance, scratch resistance, flexibility (BS3900 Part E4) and resistance to Tri-n-Butyl Phosphate (main ingredient in Skydrol aviation hydraulic oil).
It is particularly good on magnesium, and gives at least 500 hours salt spray resistance ( ASTM B117) on its own.
Application -
Apply by conventional or airless spray. Prior to application the substrate should be thoroughly clean and pretreated (Etch primed / Shot blasted / Alocrome 1200). The primer, once mixed should be allowed to stand for 30 minutes prior to use. Always re-stir mixed material after standing.
| Physical Properties - | |
| Mixing Ratio | 4:1 |
| Thinner | IP9064/Thin |
| Supply Viscosity | Ready for use |
| Colour | Yellow / Green |
| Gloss Level | Semi matt |
| Film Thickness | 20 microns |
| Flash Point/Class/UN No | 4°C / 3 / Paint UN1263 |
| Pack Size | 4 litre |
| Shelf Life | 12 months |
Health & Safety |
Before use please request, our latest Health and Safety Data Sheet |
