EROSION AND HEAT RESISTANT COATING

IP Code No - IP9188, IP9188/693 Grey IP9188 Blue

OMAT No - 7/5D

Product Description -

Erosion resistant stoving coating, resistant to heat, corrosion and aircraft fluids. Suitable for use on steel and aluminium components with a continuous running temperature of less than 280°C (535°F).

For use on engine components operating up to 250°C. This material is now only normally made in white as a standard product, although it has been made BS381C-693 (Rolls Royce Grey) and BS381C-175 (Blue).

Current uses include the:-

• Impellers in gas compressors pumping North Sea gas from offshore platforms

Resistant to hydrogen sulphide and carbon dioxide, used to protect rough casting against corrosion and crusting.

MSRR 9188 OMAT 7/5D (Alternative to PL205 3862-X-0000) Similar to DTD 900/6002

Tested to the following minimum specification, actual performance is, of course, in excess of this.

• 100 Hours dry heat at 300°C (575°F)
• 100 Hours ester lubricant resistance at 150°C (300°F)
• 3 Hours Skydrol resistance at 70°C (160°F)
• 100 hours engine fuel at 150°C (300°F)

Spray one coat and flash off for 20 minutes, apply second coat and flash off for 30 minutes.
Stove for 2 hours at 185-1951C (365-3851F). Repeat process if greater film thickness is required.
May be applied by brush over small areas.

Health & Safety

Before use please request, our latest Health and Safety Data Sheet