HIGH HEAT THIN FILM RESISTANT SACRIFICIAL ALUMINIUM COATING

IP Code No - IP9356

This thin film sacrificial aluminium product is a corrosion resistant coating designed for use in challenging environments such as aero engine and marine situations. Normally spray applied, IP9356 is used, for example, in close tolerance areas to protect components from salt laden atmospheres, high temperature oxidation, chemicals and abrasives.

Used in a wide variety of applications, IP9356 provides corrosion and oxidation protection on iron, steel, heat treated stainless steel alloys, titanium and other metallic substrates at temperature up to 700°C (1300°F). IP9356 can also be super or vibro polished (RPS619) to enhance flow of air in aircraft engines where smooth surfaces enhance energy efficiency. (see also, Ipseal and Smooth Seal).

Alternative to Sermetal 709 and 762, possibly being superseded by LR168G, alternative to Sermetal 962.

For more information see Ipcote IP9183

This is only part of the Ipcote IP9356 range. Apply for further information about our Seal coats, thin film versions, low cure, low hexavalent chrome versions and touch ups.

MSRR 9356

10 microns per coat +/- 2 microns (0.4 thou +/- 0.1)
Normally 2 coats per application giving 20-25 microns (0.4 thou - 1 thou)
Operating temperature: From -40°C (-40ºF) to +700°C (1290°F)
Coverage - 7 square metres per litre at 10 microns (0.4 thou)
Viscosity - 27 +/- 2 seconds B3 at 20°C, 70°F
Less than 3% Hexavalent chrome

Apply for RPS 666/?

Health & Safety

Before use please request, our latest Health and Safety Data Sheet