650 RANGE HIGH TEMPERATURE MARKING PAINTS

IP Code No - PL149 / PL150 / PL151/R1 / L152/R1 / PL153 / PL155/R1 / PL167/R1
PL168/R1 66 Clear Primer IP9091

Inorganic paints suitable for marking and coating high temperature steels. Resistant to fuels, oils and lubricants, including Skydrol. Recently being re-formulated. These products are being made more sprayable, and therefore useable. Catalysts are available to enhance 'sprayability' and water resistance when air dried.

MSRR 9041 (Spraying). MSRR 9285 (Brushing) has recently been withdrawn and any of the listed products can be brushed, up to 10% water can be added to make the product more easily sprayable.

Code

Resists skydrol and other aggressive liquids. Standard test 100 hours at 650°C, but has been used up to 800°C.
White is only spec’d to 450°C, Orange and Red are now `only spec’d to 500°C

IP9091 Clear Primer 66 can be used to aid adhesion of coloured topcoat. Apply by spray or brush (as per grade) to a perfectly clean and preferably shot blasted surface. Allow to dry, material is touch dry in 20 minutes, but should not be subjected to heat for 48 hours if being used as an air drying material. However unless the material has been subjected to heat in excess of 150°C (300°F) it may wash off subjected to weathering. Alternatively, air dry for 1 hour, then stove at 150°C (300°F) for a minimum of 30 minutes. Apply for RPS 661/28.

Health & Safety

Before use please request, our latest Health and Safety Data Sheet