NML 35 - TWO PART LOW TEMPERATURE CURING SEALANT /
ADHESIVE
This adhesive is tested to MSRR 9026 for double
lap shear strength at room temperature and 80°C (175°F). In addition,
it has been tested at 80°C (175°F) for 1000 hours, also in hydraulic fluid,
oil, fuel and distilled water. Ask for RPS 482/2.
NML 35A -OMAT 805, NML 35B - OMAT 806
NML 66 - HIGH TEMPERATURE EPOXY VARNISH
NML 66 high temperature epoxy varnish is used
for sealing machined areas of GRP where bare fibres are exposed. NML 66
can be used where the operating temperature does not exceed 200°C (390°F).
NML 66 can be applied by brush or spray and should be stoved for 1 hour
at 180°C (355°F) to achieve full protection.
This material conforms to Rolls Royce specification MSRR 9018 (RR Code 136860).
NML 116 - FLEXIBLE ADHESIVE
NML 116 is a flexible adhesive used in repair operations, some times known
as PD1 kits. NML 116 is supplied in single application kits of 23.566g.
(RR Code 136871).
NML 121 - PREFORMING SIZE
NML 121 is a performing size used in injection
moulding processes of composites. (RR Code 136965).
NML 122 - ADHESIVE
NML 122 is a low viscosity adhesive for use on composite nose cone
tabs. (RR Code 136925).
Health & Safety |
Before use please request, our latest Health and Safety Data Sheet |
