|
IP Code No - PL149 / PL150 / PL151R1 / PL152/R1
/ PL153 / PL155R1 / PL167R1 / PL168R1 IP9091 - 66 Clear Primer
|
OMAT Nos - 7/110A, 7/110B, 7/110F, 7/110C, 7/110D, 7/110E, 7/110G, 7/124 |
Product Description - |
Inorganic paints suitable for marking and coating high temperature steels.
Resistant in some colours to 800°C, fuels, oils and lubricants, including
Skydrol. Recently re-formulated, these products have been made more sprayable,
and therefore useable. Similar to Sermetel 406 - 413 range
Red and orange still contain a ‘Safe‘ cadmium pigment.
|
| Approvals/References/Specs -
|
|
MSRR 9041 (Spraying). MSRR 9285 Brushing grade has recently been withdrawn
and any of the listed products can be brushed. Up to 10% water can be
added to make the product more easily sprayable.
Similar to Allied Signal spec MCS 9055K
|
Code
|
Colour
|
RR Code
|
OMAT
|
Similar to
|
| IP9091 |
Clear Primer 66 |
|
7/124 |
|
| PL149 |
White |
138023 |
7/110A |
Sermetel 739 |
| PL150 |
Green |
138024 |
7/110B |
Sermetel 413 |
| PL151R1 |
Blue |
138025 |
7/110F |
Sermetel 412 |
| PL152R1 |
Black |
138026 |
7/110C |
Sermetel 409 |
| PL153 |
Grey |
138027 |
7/110D |
Sermetel 411 |
| PL155R1 |
Orange |
138028 |
7/110E |
Sermetel 406 |
| PL167R1 |
Red |
138016 |
7/110G |
Sermetel 407 |
| PL168R1 |
Yellow |
138128 |
|
Sermetel 1465 |
|
| Performance - |
|
Resists skydrol and other aggressive chemicals, solvents and liquids.
Standard test 100 hours at 650C, but has been used up to 800°C.
White is only spec’d to 450°C, at which temperature it starts to turn
a light grey. Orange and Red are now only spec’d to 500°C
|
| Application - |
|
IP9091 Clear Primer 66 can be used to aid adhesion of coloured topcoat.
Apply by spray or brush (as per grade) to a perfectly clean and preferably
shot blasted surface. Allow to dry, material is touch dry in 20 minutes,
but should not be subjected to heat for 48 hours if being used as an air
drying material. An engine run will then ‘fix’ the material. However unless
the material has been subjected to heat in excess of 150°C (300°F)
it may wash off if subjected to weathering. Alternatively, air dry for
1 hour, then stove at 150°C (300°F) for a minimum of 30 minutes.
Apply for RPS 661/28.
|
| Physical Properties - |
| |
|
| Mixing Ratio |
One part product |
| Thinner |
Wash Guns and Brushes in Water |
| Supply Viscosity |
Ready for use |
| Colour |
As listed or by negotiation |
| Gloss Level |
Semi Matt, Eggshell, but can be
polished |
| Film Thickness |
15 microns |
| Pack Size |
500ml plastic containers |
| Shelf Life |
12 months |
Health & Safety |
Before use please request, our latest Health and Safety Data Sheet |
