IP Code No - PL224/R1
OMAT No - 844
Product Description -
Designed for filling and sealing compressor blade roots at high temperatures with resistance to aircraft fluids and minimum expansion and contraction up to 400°C (750°F).
Approvals & Relevant Specifications
Performance
Resistant to a wide range of fuels, oils, solvents and heat up to 650°C (1,205°). After a minimum of 24 hours air drying, this product will stand up to 400°C (750°F) for 4 hours without cracking.
Application
All surfaces should be thoroughly clean, the material should be stirred to an even paste prior to application.
Apply by spatula, where splashes and material need removing prior to stoving this can be done with a damp cloth or water.
Apply for RPS 482/40.
Application Instructions
Surface Preparation: | Endure that surfaces are clean and free from dirt |
Pre-Treatment: | Liquid degrease |
Mixing Instructions: | Stir to an even paste prior to application |
Thinner/Reducer Addition: | Water for cleaning |
Curing
1 hour at room temperature
Technical Properties -
Viscosity: |
Paste |
Supply Solids: |
64.5% by weight |
Supply VOC: |
Paste |
Colour(s): |
Off White / Grey |
Clean Up: |
Water |
Class: |
Non hazardous for transport |
Specific Gravity: |
1.69 |
Flash Point: |
Non applicable |
Gloss: |
Not Applicable |
Pack Size: |
1 Kilo |
