IP Code No - PL237R1
OMAT No - 4/43
Product Description -
Molybdenum Disulphide loaded lubricating coating designed for operating conditions up to 300ºC (570ºF). For use where high wear and pitting occur and as a protection against fretting. Where short service life occurs due to chemical attack, corrosion or high temperature or where lubrication intervals are too short.
Often used as an alternative to MolyKote 3400A
Approvals/References/Specs -
MSRR9274; RR Code 110566; OMAT 4/43 – MTU spec. MTS 1013A – 02 Kawasaki – JMSRR 9274
Performance -
Resistant to dry heat to 300°C (570°F), Skydrol, ester lubricants and corrosive engine by-products.
Application -
Degrease components, spray one thin coat (8-13 microns), air dry for 10 minutes and stove for one hour at 190°C (375°F).
Ask for RPS 661/9.
| Physical Properties - | |
Mixing Ratio |
Ready for use |
Thinner |
IP9151 or 665-550-025 |
Supply Viscosity |
21-38 Seconds B3 Cup |
Colour |
Grey |
Gloss Level |
Semi Matt |
Film Thickness |
8 - 13 microns |
Flash Point/Class/UN No |
24°C / 3 / Paint UN1263 |
Pack Size |
1 litre containers |
Shelf Life |
12 months in temperate climate |
Health & Safety |
Before use please request, our latest Health and Safety Data Sheet |