IP Code No - IP9136/R1
OMAT No - 4/44C
Product Description -
Spray applied, stoving cured, silicon resin modified dry film lubricant for use where high operating temperatures preclude the use of conventional oils and greases. Suitable for application to steel, aluminium, magnesium and titanium alloys. Used on, for example, spherical bearing surfaces to protect against frettage corrosion and on bolts for torque. Gives exceptionally good rubbing wear resistance. When used on bolts, it increases torque end load. It is also used on turbine blade roots and fir trees where it reduces the likelihood of the disc splitting.
Approvals/References/Specs -
MSRR9276; CPW 27; MTU ; MTS 1173 ; AMS 3132 (Graphite filled); RR Code 110565;
OMAT 4/44CCoMat #10 – 002 NSN 9150-99-500-0559 - Kawasaki – JMSRR 9276
GEC Marconi 1608/0038/001; SNECMA spec P1064; JAEC JCR –024
It is alternative to the following:
PL239 (3862X9010) AFS473, which was originally PL239 ; Superceded PL 94 in about 1984
Performance - |
|
|
Resistant to dry heat up to 400ºC (750ºF) in oxidising atmospheres and 500ºC (930ºF) where oxygen is excluded, ester lubricants, Skydrol and corrosion. Contains approximately 27% graphite in the dry film. |
|
Application - |
|
|
Spray a light coat and allow to air dry for 10 minutes, stove for 2 hours at 190°C (375°F). Where spraying is not possible small areas may be coated by brush. Ask for RPS 661/10.
|
|
Physical Properties - |
|
Mixing Ratio |
One part product |
Thinner |
IP9151 |
Supply Viscosity |
Ready for use |
Colour |
Grey |
Gloss Level |
N/A |
Film Thickness |
7.5 - 12.5 microns |
Flash Point/Class/UN No |
41°C / 3 / Paint UN1263 |
Pack Size |
1 litre UN approved cans |
Shelf Life |
12 months |
Health & Safety |
Before use please request, our latest Health and Safety Data Sheet |
