- High Performance 2 Component Base Coats and Finishes
- Excellent Hardness; Chemical Resistance & Flexibility
- Excellent Weathering using Exterior Catalyst
- Suitable for use as a one coat finish or as base coat in a clear over base system
- Suitable as base coat for the Cubic Printing process
|
| Codes - |
|
37003 Swan Beige Gloss
37019 Pine Gloss
37005 Mid Range Brown Gloss
37020 Black Gloss
37008 Objex(Dark) Mahogany Gloss
37022 Green Texture
37009 Headset Brown Gloss
37023 Bright Red Texture
37010 Bright Silver
37024 Black Matt
37011 Bright Gold
LR 468 Aluminium
37012 Copper
37000 Std Activator
37014 White Gloss
37004 Exterior NY Act
37017 Mod Mahogany semi-matt
37007 Slow Thinner
37018 Bush Brown Gloss
42000 Thinner
|
| Physical Properties - |
| Supply Viscocity |
Standard: 75-80" /
B4 / 20°C
Mod: 70" / B4 / 20°C |
| Supply SG |
Standard: 1.00-1.38 dependent
on colour
Mod: 1.00-1.38 dependent on colour |
| Supply Solids |
Standard: 58% ±
3%
Mod: 45% ± 3%
Activator: 63% ± 3% |
| Flash Point |
High Solids: 22ºC
- 32ºC
Standard: Below 22ºC |
| |
| Surface Preparation - |
|
Ensure surfaces are clean and free from dust, dirt etc. Degrease base
plastic with alkali degreaser of IPA wipe.
Can be applied directly to correct colour ABS; ABS/PC or flamed PP or
HDPE.
|
| Mixing - |
|
Refer to specific Product Mixing and Use sheet.
|
| Application - |
|
Apply by conventional or HVLP Spray
Mixed Pot Life: 2 hours
|
| Drying / Curing Schedule - |
Air Dry: Touch Dry 30-45 minutes, hard dry for
packing - 24 hrs
Force Cure: 37000 activator 20-30 minutes
@ 60°C or 37004 activator: 30-45 minutes @ 60-70°C
|
| Coverage - |
|
8-10 square metres per litre
|
| Clean Up- |
|
Thinners 42000 or Gunwash 40006
|
| Storage - |
Shelf life: 12 months
Highly flammable liquid:
Store and use in accordance with the flammable liquid regulations.
|
Health & Safety |
Before use please request, our latest Health and Safety Data Sheet |
|
This information is given in good
faith for the guidance of users, but is without warranty or liability.
|
