- Solvent and Water Based Grades
- Excellent Adhesion to Flamed & Unflamed Polypropylene
- Overcoatable with a wide variety of 1 pack &
two pack finishes
- Fast Drying/Rapid Overcoating Times
|
| Codes - |
|
45000 Solvent Based Clear
40004 Water Based Clear
|
| Physical Properties - |
| |
|
| Supply Viscocity |
45000: 25”/B4/20°C
40004 20”/B3/20oC |
| Supply SG |
45000: 0.90
40004: 1.00 |
| Supply Solids |
45000: 18.5%
40004: 9.0% |
| Flash Point |
45000: 22-32°C
40004: N/A; water based |
| |
| Surface Preparation - |
|
Ensure surfaces are clean and free from dust, dirt etc.
It is usual to pre-clean the plastic with iso-propanol, aliphatic hydrocarbon,
or aqueous alkali degreasing solution.
Before paint application ,de-stat surface to reduce dust.
|
| Application - |
|
Apply by conventional or HVLP Spray
45000: Use as supplied; application solids can be reduced as required
with AD thin.
40004: Stir Vigorously Before Use. Use as supplied.
|
| Drying / Curing Schedule - |
Air Dry: Touch Dry 5-15 minutes. Can be overcoated
2 hours after application.
|
| Coverage - |
|
8-10 square metres per litre
|
| Clean Up- |
|
45000: Thinners AD-Thin or Gunwash 40006
40004: Tap Water
|
| Storage - |
Shelf life: 12 months
Highly flammable liquid:
Store and use in accordance with the flammable liquid regulations.
|
Health & Safety |
Before use please request, our latest Health and Safety Data Sheet |
|
This information is given in good
faith for the guidance of users, but is without warranty or liability.
|
