indestructible advanced coatings

COATINGS FOR PLASTICS - 48000 SERIES - 2 PACK LOW VOC POLYURETHANE  FINISHES

  • Low VOC (Less than 420gms/litre) High Build Finishes
  • High Performance 2 Pack Finishes
  • Excellent Hardness; Chemical Resistance & Flexibility
  • Excellent Weathering using Exterior Catalyst
  • Suitable for use as a one coat finish or as base coat /clear system
Codes -


48000 White Gloss
48010 Clear Gloss
4800X Black Gloss
48001 Activator
42000 Thinner

 
Physical Properties -
   
Supply Viscocity Base: 75-80"/B4/20°C
Activator: 50"/B4/20°C
Supply SG Base: 1.04-1.45 dependent on colour
Activator: 1.05
Supply Solids Base: 62% ±3%
Activator: 48% ±3%
Flash Point Base: 22-32°C
Activator: 22-32°C
 
Surface Preparation -


Ensure surfaces are clean and free from dust, dirt etc. Degrease base plastic with alkali degreaser of IPA wipe.

Can be applied directly to correct colour ABS; ABS/PC or flamed PP or HDPE.

On composites and glass and carbon fibre reinforced plastics apply over base coat of 50015 2 pack epoxy spray primer-filler.

 
Mixing -


Refer to specific Product Mixing and Use sheet.

 
Application -


Apply by conventional or HVLP Spray.
Mixed Pot Life: 4 hours

 
Drying / Curing Schedule -


Air Dry: Touch Dry: 5 hrs - Hard Dry for packing: 24 hours
Force Cure: 40-60 minutes @ 60-70ºC

 
Coverage -


8-10 square metres per litre

 
Clean Up-


Thinners 42000 or Gunwash 40006

 
Storage -


Shelf life: 12 months

Highly flammable liquid: Store and use in accordance with the flammable liquid regulations.

Health & Safety

Before use please request, our latest Health and Safety Data Sheet

This information is given in good faith for the guidance of users, but is without warranty or liability.