indestructible advanced coatings

GENERAL INDUSTRIAL FINISHES - 50000 SERIES - VOC COMPLIANT 2 PACK EPOXY FINISHES

Codes -


50009 Zinc Phosphate Primer
50015 Grey Spray Primer Filler
50000 Gloss White
50012 Copper
50002R1 Gloss Swan Beige
50013 Gloss Grey 693
50003 Gloss Mid Range Brown
50014 Matt Black
50005 Gloss Clear


50016 Gloss Black
50006 Gloss Golden Yellow 356
50007 Gloss Cherry Red 538
50001R1 Catalyst
50008 Bright Aluminium
50001-M Matt Catalyst
50010 Bright Silver
50011 Gold
42000 Thinners

Physical Properties -

   
Supply Viscocity Base: 60-70 secs / B4 / 20°C
Catalyst: 30 secs / B4/ 20°C
Supply SG Base: 1.05 – 1.45 dependent on colour
Catalyst: 0.99
Supply Solids Base: 58-72% dependent upon colour
Catalyst:88%
Flash Point 22ºC - 32ºC
 
Surface Preparation -


Ensure surfaces are clean and free from dust, dirt etc.

  • Ferrous Metals: Phosphate pretreat or etch prime
  • Non-ferrous Metals: Chromate pretreat or etch prime
  • Composites: Solvent wipe
  • Thermoset Plastics: Solvent wipe with IPA
Mixing -


Refer to Specific Product Mixing and use sheet.
When mixed to spray viscosity, all products have a VOC content less than 420 gms/litre.

 
Application -


Apply by conventional or HVLP Spray
Mixed Pot Life: 4-6 hours

 
Drying / Curing Schedule -


Air Dry:Touch Dry: 45-60 minutes
Hard Dry for packing: 24 hours
Force Cure: 20 minutes @ 125ºC

 
Coverage -


8-10 square metres per litre

 
Clean Up-


Thinners 42000 or Gunwash 40006

 
Storage -


Shelf life: 12 months

Highly flammable liquid: Store and use in accordance with the flammable liquid regulations.

Health & Safety

Before use please request, our latest Health and Safety Data Sheet

This information is given in good faith for the guidance of users, but is without warranty or liability.