indestructible advanced coatings

IPSLIP 9286 - LOW FRICTION COATING

Ipslip520 is a fluoropolymer based coating specifically formulated for application to small components by the  ‘dip spin’ technique. The cured coating has excellent mechanical properties which when combined with its outstanding anticorrosion properties make it ideal for the protection of automotive components, particularly items such as threaded fasteners, small pressings, springs etc.
Outstanding Features -

 

  • Excellent corrosion protection: superior to most common plating techniques such as Zinc or Cadmium plate.
  • Completely dry lubricating film: Resists pick up of dust, dirt and other harmful contaminants.
  • Good resistance to a broad spectrum of aggressive chemicals.
  • Uniform friction coefficient: Allows precision tensioning of threaded connections.
  • Reduces wear: Extends component life.
  • Easily applied by spray or dip spin techniques.
Technical Data -
   
Appearance Dry, semi-gloss coating with a waxy feel. Various colours available.
Typical thickness 5-25um recommended (3-6 microns per coat by dip spin).
Cure temperature 205°C/30 minutes.
Operating temperature
-50°C to +260°C
Corrosion protection
(ASTM B117)		 Up to 1000hrs when tested at typical thickness over Ipcote 9183 aluminium base coat.
Application Apply by spray, brush, dip or dip spin at supply viscosity.  dip or dip spin application may be aided by the addition of up to 50% ipslip 520 thinner.
Coverage 5-25 square metres per litre
Clean up Ipslip 520 thinner

Health & Safety

Before use please request, our latest Health and Safety Data Sheet

This information is given in good faith for the guidance of users, but is without warranty or liability.