General Industrial Range Paints and Coatings

GENERAL INDUSTRIAL FINISHES - 41000/AD - QAD AIR DRYING PRIMERS & FINISHES

Quick Air Dry
Good Gloss and Build
Excellent Exterior Weathering
Resistant to Petrol and Oils
Suitable for Agricultural Equipment; Machinery; Skips and General Metalwork

Codes -

Primers:

ADP00 White
ADP01 Light Grey
ADP02 Red Oxide
ADP03 Dark grey
ADP04 Black Anti Corrosive

Finishes:

AD00 White Gloss
AD10 Black Gloss
AD20 Yellow Gloss
AD30 Green Gloss
AD40 Red Gloss
AD50 Brown Gloss
AD70 Clear Gloss
AD80 Blue Gloss
AD90 Metallics

For full colour range please enquire.

Physical Properties -

Supply Viscocity

75-80'/B4/20°C

Supply SG

1.00 - 1.20 dependant on colour

Supply Solids

55% +/- 3%

Flash Point

Below 22 - 32°C

Surface Preparation -

Ensure surface is dry & dust free.
Degrease and preferably pretreat metal surfaces with phosphate or chromate pretreatment or etch primer.

Application -

Apply by conventional, HVLP or Airless Spray.
Can be adjusted for Electrostatic Spray: Contact our Technical Department
Apply as supplied - Can be thinned with up to 10% AD thin.

Drying / Curing Schedule -

Touch Dry: 20 minutes
Handleable: 1 hr
Handdry for packing: 24 hrs

Coverage -

8-10 square metres per litre

Clean Up-

AD Thin or Gunwash 40006

Storage -

Shelf life: 12 months

Highly flammable liquid: Store and use in accordance with the flammable liquid regulations.

This information is given in good faith for the guidance of users, but is without warranty or liability. Any queries should be referred to our technical department.

Before use, please request our latest health & safety data sheet.

GENERAL INDUSTRIAL FINISHES - 50000 SERIES - VOC COMPLIANT 2 PACK EPOXY FINISHES

Low VOC(less than 420gm/litre) High Performance 2 Component Finishes

Excellent Hardness & Durability

Ultimate Chemical Protection

Cold or Low Temperature Cure

Suitable for use on a wide variety of substrates including: Ferrous and Non-ferrous Metals; Composites and Thermoset Plastics.

Codes -

50009 Zinc Phosphate Primer
50015 Grey Spray Primer Filler
50000 Gloss White
50012 Copper
50002R1 Gloss Swan Beige
50013 Gloss Grey 693
50003 Gloss Mid Range Brown
50014 Matt Black
50005 Gloss Clear

50016 Gloss Black
50006 Gloss Golden Yellow 356
50007 Gloss Cherry Red 538
50001R1 Catalyst
50008 Bright Aluminium
50001-M Matt Catalyst
50010 Bright Silver
50011 Gold
42000 Thinners

Physical Properties -

Supply Viscocity

Base: 60-70 secs / B4 / 20°C
Catalyst: 30 secs / B4/ 20°C

Supply SG

Base: 1.05 – 1.45 dependent on colour
Catalyst: 0.99

Supply Solids

Base: 58-72% dependent upon colour
Catalyst:88%

Flash Point

22°C - 32°C

Surface Preparation -

Ensure surfaces are clean and free from dust, dirt etc.

Ferrous Metals: Phosphate pretreat or etch prime

Non-ferrous Metals: Chromate pretreat or etch prime

Composites: Solvent wipe

Thermoset Plastics: Solvent wipe with IPA

Mixing -

Refer to Specific Product Mixing and use sheet.
When mixed to spray viscosity, all products have a VOC content less than 420 gms/litre.

Application -

Apply by conventional or HVLP Spray
Mixed Pot Life: 4-6 hours

Drying / Curing Schedule -

Air Dry:Touch Dry: 45-60 minutes
Hard Dry for packing: 24 hours
Force Cure: 20 minutes @ 125°C

Coverage -

8-10 square metres per litre

Clean Up-

Thinners 42000 or Gunwash 40006

Storage -

Shelf life: 12 months

Highly flammable liquid: Store and use in accordance with the flammable liquid regulations.

Before use, please request our latest health & safety data sheet.

Physical Properties -
Supply Viscocity	75-80'/B4/20°C
Supply SG	1.00 - 1.20 dependant on colour
Supply Solids	55% +/- 3%
Flash Point	Below 22 - 32°C
Surface Preparation -
Ensure surface is dry & dust free. Degrease and preferably pretreat metal surfaces with phosphate or chromate pretreatment or etch primer.
Application -
Apply by conventional, HVLP or Airless Spray. Can be adjusted for Electrostatic Spray: Contact our Technical Department Apply as supplied - Can be thinned with up to 10% AD thin.
Drying / Curing Schedule -
Touch Dry: 20 minutes Handleable: 1 hr Handdry for packing: 24 hrs
Coverage -
8-10 square metres per litre
Clean Up-
AD Thin or Gunwash 40006
Storage -
Shelf life: 12 months Highly flammable liquid: Store and use in accordance with the flammable liquid regulations.
This information is given in good faith for the guidance of users, but is without warranty or liability. Any queries should be referred to our technical department.

Codes -
50009 Zinc Phosphate Primer 50015 Grey Spray Primer Filler 50000 Gloss White 50012 Copper 50002R1 Gloss Swan Beige 50013 Gloss Grey 693 50003 Gloss Mid Range Brown 50014 Matt Black 50005 Gloss Clear	50016 Gloss Black 50006 Gloss Golden Yellow 356 50007 Gloss Cherry Red 538 50001R1 Catalyst 50008 Bright Aluminium 50001-M Matt Catalyst 50010 Bright Silver 50011 Gold 42000 Thinners
Physical Properties -
Supply Viscocity	Base: 60-70 secs / B4 / 20°C Catalyst: 30 secs / B4/ 20°C
Supply SG	Base: 1.05 – 1.45 dependent on colour Catalyst: 0.99
Supply Solids	Base: 58-72% dependent upon colour Catalyst:88%
Flash Point	22°C - 32°C

Surface Preparation -
Ensure surfaces are clean and free from dust, dirt etc. Ferrous Metals: Phosphate pretreat or etch prime Non-ferrous Metals: Chromate pretreat or etch prime Composites: Solvent wipe Thermoset Plastics: Solvent wipe with IPA
Mixing -
Refer to Specific Product Mixing and use sheet. When mixed to spray viscosity, all products have a VOC content less than 420 gms/litre.
Application -
Apply by conventional or HVLP Spray Mixed Pot Life: 4-6 hours
Drying / Curing Schedule -
Air Dry:Touch Dry: 45-60 minutes Hard Dry for packing: 24 hours Force Cure: 20 minutes @ 125°C
Coverage -
8-10 square metres per litre
Clean Up-
Thinners 42000 or Gunwash 40006
Storage -
Shelf life: 12 months Highly flammable liquid: Store and use in accordance with the flammable liquid regulations.

General Industrial Range Paints and Coatings

GENERAL INDUSTRIAL FINISHES - 41000/AD - QAD AIR DRYING PRIMERS & FINISHES

GENERAL INDUSTRIAL FINISHES - 50000 SERIES - VOC COMPLIANT 2 PACK EPOXY FINISHES

For More Information