IP CODE NUMBER IP9185 Khaki
PRODUCT DESCRIPTION
Low chrome Khaki Ipseal IP9185 is an inorganic protective coating used as a barrier on low chrome Ipcote IP9182, also contains no glycol ethers.
It closely resembles Khaki Ipseal IP9184 R1 ; Sermaseal 1318 and 570.
IP9185 Khaki Ipseal seals porosity of IP9182 without detracting from it’s sacrificial properties. It also creates an electrically non-conductive barrier coat. The use of Ipseal results in a smoother, harder coating which provides a barrier against carbon deposits, etc extending the useful life of the base coat and a smoother finish which enhances airflow characteristics, and therefore engine efficiency. For use at temperatures up to 800°C (1400°F). This material also has capabilities as a coating in its own right, being water based with no VOC's, this coating has high temperature resistance up to 800°C on such metals as nickel.
See also Smoothseal IP9444 to MSRR 3010.
APPROVALS / REFERENCES / SPECS
MSRR9140 (previously MSRR9355)
IP9185 Khaki low chrome Ipseal :RR Code 139265
N.S.N. 8030.99.434.1295
Alternative to Sermaseal 1318 and 570;OMAT number 7/168B
PERFORMANCE
Tested to specification MSRR 9140, (under test to CPW 404)
Smooth eggshell finish in Khaki
Typical Film thickness 4 - 6 microns per coat (0.2 thou)
Operating temperature -40 to + 800°C, (1420°F)
Less than 1.0 % chrome Significantly increases resistance of Ipcote products, IP 9182; IP9183, IP9253 etc to corrosion resistance
APPLICATION: Easy to apply water based type product.
Significantly easier to apply than competitive products. Apply to RPS 661/
PHYSICAL PROPERTIES
Mixing Ratio: One Part Product
Thinner: Water to Clean
Supply Viscosity: Ready for Use
Colour: Khaki
Gloss Level: Eggshell
Film Thickness: 4 - 6 Microns
Flash Point / Class / UN No/ 6.1 / Toxic3287
Pack Size: 1 and 5 litre containers
Shelf Life: 12 months
Health & Safety |
Before use please request, our latest Health and Safety Data Sheet |
