Anticorrosion moly di sulphide dry film lubricant for high load applications.
Ipslip 5000 produces a durable, bonded coating containing a synergistic blend of finely divided lubricating pigments in a tough, thermosetting resin binder. The system was developed to meet the demands for improved lubrication and corrosion protection in aggressive environments and provides a thin, hard, low friction coating which is capable of continuous operation at temperature extremes.
Molybdenum Disulphide low friction coating
Molybdenum Disulphide loaded lubricating coating designed for operating conditions up to 300ºC (570ºF). For use where high wear and pitting occur and as a protection against fretting. Where short service life occurs due to chemical attack, corrosion or high temperature or where lubrication intervals are too short.
Often used as an alternative to MolyKote 3400A
Anti-corrosion molybdenum disulphide dry film lubricant for high load applications.
Ipslip 5266 produces a durable, bonded coating containing a synergistic blend of finely divided lubricating pigments in a tough, thermosetting resin binder. The system was developed to meet the demands for improved lubrication and corrosion protection in aggressive environments and provides a thin, hard, low friction coating which is capable of continuous operation at temperature extremes.
Water based dry film lubricant for high load applications.
Ipslip 5400 should be considered as a water based version of Ipslip 5000. The coating retains many of the outstanding properties of Ipslip 5000 but with the added environmental benefit of being water based.
Low friction coating.
A low friction coating formulated with PTFE and MoS2 to give excellent dry film lubrication and wear resistance. One coat system suitable for use in conditions of high temperature providing good abrasion resistance, flexibility and chemical resistance. Suitable for use on a wide variety of items where high wear is a requirement and dry film lubrication is beneficial. Available as a black low gloss finish with a smooth waxy feel. Suitable Alternative to Xylan 1052.
Low friction coating.
A fluoropolymer coating formulated to give excellent low friction and wear resistance. Available in a range of colours but especially white; pastels and bright metallics. One coat system providing excellent abrasion resistance, flexibility and chemical resistance. Suitable for use on a wide variety of items, including automotive components; saw and secateur blades and any areas were medium duty dry film lubrication is required.
Cold cure 2 pack low firction fluoropolymer coating.
Ipslip 7370 produces a durable, bonded coating containing a synergistic blend of finely divided fluoropolymers in a tough, cold curing polyurethane resin binder. The coating is designed for use on items that cannot be heat cured but require the benefits that low friction coatings provide.
Cold cure 2 pack low firction fluoropolymer coating.
Ipslip 7480 produces a durable, bonded coating containing a synergistic blend of finely divided fluoropolymers in a tough, cold curing resin binder. The coating is designed for use on items that cannot be heat cured but require the benefits that low friction coatings provide.
Low firction fluoropolymer coating.
Ipslip Clear produces a durable, bonded coating containing a synergistic blend of finely divided fluoropolymers in a tough, thermosetting resin binder. As its name would suggest, the cured coating is essentially colourless and its presence therefore not easily detected.
Low firction coating.
A fluoropolymer coating formulated to give excellent low friction and wear resistance. One coat system suitable for use in conditions of high temperature providing excellent abrasion resistance, flexibility and chemical resistance. Suitable for use on a wide variety of items, including automotive components; saw and secateur blades and any areas were medium duty dry film lubrication is required. Available in a range of colours except white and pastels. Provides harder surface compared to Ipslip 9286 Used as an alternative to Xylan 1014.
Is a durable, bonded coating containing a synergistic blend of finely divided flouropolymers and anti-corrosion pigments in a tough, thermosetting resin binder.
Ipslip 7776 produces a durable, bonded coating containing a synergistic blend of finely divided flouropolymers and anti-corrosion pigments in a tough, thermosetting resin binder. The system, which was developed to meet the demands for improved lubrication and corrosion protection in aggressive sub-sea environments, provides a thin, low friction coating which is capable of continuous operation at temperature extremes.
Anit-corrosion low friction coating
A fluoropolymer coating formulated on stoving epoxy resin system to give excellent low friction and wear resistance. One coat system suitable for use in conditions where high corrosion resistance is essential. Suitable for use on a wide variety of items, including aerospace and automotive components; typical example is the use of 3020 red on brake calipers for Rolls-Royce-Bentley. Available in black; red and other colours to order. Suitable Alternative to Xylan 1270/5200; Molykote D708; EM 6110.
Low friction coating
A fluoropolymer coating formulated to give excellent low friction and wear resistance.
Low friction 2 pack PU coating
A low friction coating formulated with PTFE to give excellent dry film lubrication and wear resistance.
High temperature dry film lubricant
IPSlip LR 1171 produces a durable, bonded coating containing a synergistic blend of finely divided lubricating pigments in a tough, thermally stable 'resin' binder. The system was developed to meet the demands for improved lubrication under high load, fretting wear conditions and provides a thin, hard, low friction coating which is capable of continuous operation at temperature extremes.
Please contact our sales office for more information.
Indestructible have a full range of Dry Film Lubricants
- Which one is best for you?
Please contact our sales office for more help and advice.
