Rust Conversion Coating
Corrosion Inhbitor
(May have replaced NSN 6850-99-8916227 Corrosion inhibitor - Protal 2000)
RUSTETA is a water based chelating polymer designed for field application to rusted steel which has been hand or power cleaned, or sand blasted.
RUSTETA neutralizes the corrosion process. It reacts quickly with the rust and transforms iron oxides into a stable and insoluble blue-black metallo-organic complex which will be ready for painting after reaction.
Reaction time depends upon ambient temperature and degree of rust and it is not necessary to wash the surface with water after reaction. RUSTETA is also an excellent adhesion promoter for subsequent coating systems.
Normal industrial hygiene practices should be observed. Before use please request, our latest Health and Safety Data Sheet.
Health Risks
Ingestion - Harmful if swallowed, keep out of reach of children, if swallowed perform gastric lavage - seek medical attention.
Skin Contact - Avoid prolonged and repeated contact with sink, wear impervious gloves, in case of contact rinse with water. In case of skin staining us a 1% solution of Sodium hypochlorite in water.
Eyes - Rinse with 1% solution of sodium bicarbonate in water.
Fire Hazard - None flammable.
On the basis of the data available to us, RUSTETA is not a dangerous preparation within the meaning of EEC Directives 77/728 and 81/916, related to the classification, packing and labelling of paints, varnishes, printing inks, adhesives and related products. One should, however, observe the usual precautionary measures for handling chemicals. Avoid contact with skin and eyes. Do not swallow. Keep out of reach of children. TLV 50mg per cubic meter of air.
Storage Store away from sun - maximum temperature 40°C
Personal Wear Mask; tightly closing eye protection and plastic gloves
Industrial Hygiene Keep away from foodstuffs, drinks and animal feed
Disposal Dilute with water in accordance with local authorities regulations
After Spillage Dilute with plenty of water
In case of skin contact - wash off with water.
In case of eye contact - rinse away thoroughly with water
Ingestion - harmful if swallowed. Delay absorption by gargling by mouth tap water, milk. Call physician. Perform gastric lavage.
LD50: above 10.000 mg per kg of rat
Has practically no biological oxygen demand
Density: | 20°C / 1.03 g/cm |
Vapour Presure: | 20°C / 24 mbar / 1,74 cm/Hg |
Viscosity: | 20°C / Ford Cup No 4 / 20-25" |
Solubility in Water: | 20°C / Complete |
PH Value: | 20°C / 1.3 |
Chemical Characterisation | Synthetic Polymers Containing Chelating Agents |
Form / Colour / Odour | Liquid / Beige / Slight |
Flash Point/Class/U.N No: | Contains no organic solvent |
Storage | Plastic Containers Only |
To Order: | To order contact Indestructible Paint. |
NON-WARRANTY. The information presented in this publication is based upon the research and experience of Indestructible Paint No Representation or warranty is made, however, concerning the accuracy or completness of the information presented in this publication. Indestructible Paint make no warranty or representation of any kind, express or implied, including without limitation any warranty of merchantability or fitness for any particular purpose, and no warranty of representation shall be implied by law or otherwise. Any products sold by Indestructible are not warranted as suitable for any particular purpose to the buyer. The suitability of any products for any purpose particular to the buyer is for the buyer to determine. Indestructible Paint assumes no responsibility for the selection of products suitable to the particular purposes of any particular buyer. Indestructible shall in no event be liable for any special, incidental or consequential damages.