|
RYLARD |
|
|
Rylard Marine Finishes
Technical Data Sheet
RY59000 Series 2 Pack Low
VOC Polyurethane Brushing Finishes
§
Low VOC(Less than 420gms/litre) High Build Finishes
§
High Performance 2 Pack Finishes
§
Excellent Hardness; Chemical Resistance & Flexibility
§
Excellent Weathering
§
Good UV resistance
§
Superb obliteration
§
Specially formulated for ease of application by brush;
roller or paint pad
Codes RY59000
Rylard Std White RY592000
White 2000
RY593032
Cream 3032
Other colours
available to order: please check with your usual sales contact.
48022
Brushing Activator 48001
Spraying Activator
48021 Brushing Thinner 42000 Spraying Thinner
Physical Supply Visc: Base: 75-80"/B4/20°C
Properties Activator: 50"/B4/20°C
Supply SG: Base: 1.04-1.45 (dependent on colour)
Activator: 1.05
Supply
Solids: Base: 62% ±3%
Activator: 48% ±3%
Flash Point: Base: 22-32°C
Activator: 22-32°C
Surface Ensure
surfaces are clean and free from dust, dirt etc.
Preparation Ferrous
Metals: Phosphate pretreat or etch prime
Non-ferrous
Metals: Chromate pretreat or etch prime
Apply over primer and/or undercoat
system of 50009 2 pack epoxy zinc phosphate primer and 48058 Rylard
polyurethane undercoat.
Composites and glass fibre: apply over
base coat of 50015 2 pack epoxy primer-filler and undercoat 48058 Rylard
polyurethane undercoat
Mixing For the 3
colours listed above mix in the ratio 5 parts base to 2 parts activator 48022
by volume. Other colours please
check with our technical department.
Allow 15
minutes dwell after mixing before use.
Mixed Pot
Life: 4 hours.
Application Formulated for
application by brush, roller or paint pad: Use brushing thinners 48021 when
ambient temperature/humidity is high to maintain wet edge.
For spray
application use Activator 48001/Spraying Thinners 42000. Can be applied by
Conventional, HVLP or Compliant Spray
Guns. Check with our technical department for correct gun set up for specific
equipment being used
Drying/Curing Air Dry: Touch Dry; 5 hours
Schedule Hard
Dry; 24 hours
Force Cure: 40-60
minutes @ 60-70°C
Coverage 8-10 square
metres per litre
Clean Up Thinners 42000
or Gunwash 40006
Storage Shelf life: 12
months
Highly flammable liquid: store and use in accordance with the flammable liquid regulations.
Health & Before use,
refer to Product Safety Data Sheet
Safety
This information is given in good faith for the guidance of users, but is without warranty or liability. Any queries should be referred to our technical department.
|
|
|
Indestructible
Paint Ltd, 23-25 Pentos Drive, Sparkhill, Birmingham, B11 3TA, UK |
|
|
