RYLARD
|
|
|
DOUBLE SHIELD ANTI
FOULING
Copper based hard anti-fouling for use both inland or at
sea.
Approval number: H.S.E.6040
An easily applied anti fouling composition. Care must be taken that the correct primer, as indicated below is selected. Best results are obtained on new work when
two coats of primer and two coats of undercoat are used followed by two coats
of Double Shield Antifouling. The second coat must be allowed to dry for a
minimum of 12 hours before launching but can be left for a longer period if
required.
Covering capacity approx. 375 to 440sq.ft per 5 litres 7.0 to 8.2sq.mtrs
per litre.
MATERIALS REQUIRED:
Rylard Marine Primer, selected for surface to be covered. Rylard Cement Filler, Rylard Undercoat for
Antifouling, Rylard Double Shield Antifouling.
RYLARD BRONZE RACING BOTTOM PAINT
A hard smooth metallic finish which may be scrubbed, rubbed down or
polished to give a slick racing finish.
Three coats of this finish is recommended over its appropriate undercoat
flatted down between coats and matted down with 400 wet or dry paper after the
final coat, or polished with worn wet or dry paper and ample fresh water. Covering capacity approx. 440 to 550sq.ft
per 5 litres 8.2 to 10.2sq.mtrs per litre.
MATERIALS REQUIRED:
Rylard Marine Primer, selected for surface to be covered. Rylard Cement Filler, Rylard Undercoat for
Antifouling, Rylard Bronze Racing Bottom Paint.
|
|
|
Indestructible
Paint Ltd, 23-25 Pentos Drive, Sparkhill, Birmingham, B11 3TA, UK |
|
|
