Thinners | Reducers | Diluent - Indestructible Paint
|
Indestructible have a range of Thinners and Reducers for use with specific ranges of coatings. The table below describes the products, relevant approvals and recommended uses. Please note that thinners / reducers / diluent are a recommendation and may be subject to local application conditions and for local environmental legislation. |
|
Product Code | Approval | Uses / Notes | Product Range to be used with |
IP9151 | OMAT 7/183 | Standard thinner for aerospace products | Multi MSRR Approvals |
665-550-025 | MSRR9226, 9228, DTD5562, 56D | Standard thinner for Rockhard Range |
|
665-555-027 |
| Slow thinner for Rockhard Range |
|
666-552-023 |
| Rockhard fast thinner (made to order) |
|
IP9038 |
| Thinner for IP9042 Kit |
|
IP9064-Thin | MSRR 9064, OMAT 793A | Thinner for IP9064 Range, 2 pack epoxies | IP9064-Range |
IP9064-TDXL | MSRR 9064, OMAT 781A | Thinner for 1 pack and 2 pack etch primers | IP9064-Range |
IP985-Reducer | ECS2178/2264 | Reducer for reduced VOC Rockhard coatings | IP985-Range |
IP715-Reducer | CPWA 714/5, PWA 36568/9 | Reducer for P & W low VOC 2 pack epoxies IP714 & IP715 | IP-714 & IP-715 |
IP3-Reducer | PRO599 | Reducer for low VOC epoxy and PU coatings | IP3-Range |
IP2372-Reducer |
| Slow Reducer for low VOC epoxy and PU coatings |
|
IP-40028 |
| Peelcoat Thinner | IP-40027 |
IP80-27-THIN | Def Stan 80-27 | Thinners for use with IP80-27 and IP80-126 ranges | IP80-27 Range |
IP80-38 | Def Stan 80-38 | Thinner for Def-Stan 80-38 Paints | Def-Stan 80-38 Paints |
IP80-68-THINNER | Def Stan 80-68 | Thinners for IP80-68 range | IP80-68 Range |
IP-MEG-Reducer |
| Fast Cut Reducer | IP3 & IP6 Range at Meggitt Aircraft Braking Systems |
S-30 | Omat 7/96A, Omat 7/137A, Omat 7/184 |
| Thinner for polymide range coatings |
9342 |
| E/S Spraying stoving thinner |
|
18662 |
| Phenolformaldehyde Lacquer Thinner |
|
18802 |
| Cellulose thinner |
|
40006 Gunwash |
| High quality Gunwash |
|
40008 |
| Thinner for K900 and others |
|
40019 |
| Thinner for Polymide |
|
40024 |
| Cleaner / Thinner for polyimide range coatings | IP9286 Range |
40040 |
| Fast set up thinner for epoxy and PU coatings |
|
40048-1201 |
| Thinner A.P.C |
|
40049-1301 |
| Thinner A.P.C |
|
40054 |
| Cleaner / Degreaser solution |
|
42000 |
| Industrial thinner for epoxy and PU coatings |
|
48021 |
| Slow thinner for 2 pack P/U |
|
50004 |
| E/S thinner for low VOC epoxy |
|
53-Reducer |
| Thinner for 53-Range |
|
Acri-Thin |
| Thinner for 1 pack acrylics |
|
ACETONE | BS509/1987 | Acetone BS509/1987 |
|
IPA | BS1595:1986 | ISOPROPANOL BS1595:1986 |
|
MEK | BS1940:1987 | M.E.K BS1940:1987 |
|
S50 |
| White Spirit D40 (BAS 40) |
|
TOLUENE | BS805/1 | Toluene BS805/1 |
|
White Spirit (D40) |
|
|
|
De-Aromatised | BS245 | White Spirit BS245 |
|
Xylene | BS458/1 (ASTM-D-843/80) | Xylene BS458/1 (ASTM-D-843/80) |
|
Storage - Health & Safety
Health & Safety: | Before use please request, our latest Health and Safety Data Sheet |
Order
To Order: | To order contact Indestructible Paint. |
NON-WARRANTY. The information presented in this publication is based upon the research and experience of Indestructible Paint No Representation or warranty is made, however, concerning the accuracy or completness of the information presented in this publication. Indestructible Paint make no warranty or representation of any kind, express or implied, including without limitation any warranty of merchantability or fitness for any particular purpose, and no warranty of representation shall be implied by law or otherwise. Any products sold by Indestructible are not warranted as suitable for any particular purpose to the buyer. The suitability of any products for any purpose particular to the buyer is for the buyer to determine. Indestructible Paint assumes no responsibility for the selection of products suitable to the particular purposes of any particular buyer. Indestructible shall in no event be liable for any special, incidental or consequential damages.
